veito AERO, Installation Instructions Manual

OPERATION
Plug it in to turn the heater on.
CLEANING AND MAINTENANCE
Always disconnect the heater from the electricity supply and allow adequate 

time (minimum of 30 mins.) for it to cool before adjusting the position or 

attempting to work on it.
If the heater has collected dust or dirt inside the unit or around the heating 

element, have the unit cleaned by a qualified service agent. Do not operate the 

heater in this condition.
The only maintenance required is cleaning of the external surfaces of the 

heater.
Do not use powerful abrasive or solvent cleaning fluids when cleaning the 

heater. Use a damp cloth to wipe the outside of the heater.
If removed from its mounting position when not in use, store the heater 

carefully in a safe, dry, childproof location.
Do not touch the heating element with bare fingers, as residue from your hand 

could affect the life of the lamp. If it is accidentally touched, remove the finger 

marks with a soft cloth moistened with methylated spirit or alcohol.
Do not attempt to repair or adjust any electrical or mechanical functions on this 

heater.
The heater contains no user serviceable parts. Check for damage to the 

appliance regularly. If damage to the appliance is suspected, discontinue use 

immediately and contact the supplier or qualified person to repair.
PRODUCT DISPOSAL
For the product sold within the European Community. At the end 

of the electrical products useful life it should not be disposed of 

household waste. please recycle where facilities exist. Check with 

your Local Authority or retailer for recycling advice in your country.

9

EN