Cihazın Tanımı
Elektrikli ani su ısıtıcısı, hem açık (basınçsız) hem de kapalı (basınçlı)
bağlantı için uygundur. Cihaz suyu içinden geçerken ısıtır.
Sıcak su musluğu açıldığında, ani su ısıtıcısı çalışır ve suyu ısıtır. Sıcak su
musluğu kapatıldığında, cihaz da tekrar kapanır.
Cihaz, önceden ısıtılmış suyla çalıştırılamaz, aksi halde yüksek sıcaklık
sigortası atar.
Güvenlik Uyarıları
Bu cihaz, evsel kullanım veya evsel kullanıma benzeyen ancak edüstriyel
olmayan; örneğin dükkanların, büroların ve diğer mesleki işletmelerin ortak
hizmet mutfaklarında ve ayrıca pansiyonların, küçük otellerin ve benzeri
ikamet donanımlarının banyolarında kullanım için uygundur.
Montaj işlemine başlamadan önce suyu ve elektriği kesiniz.
Cihaza gelen elektrik akmını kesmeden, cihazın kapağını kesinlikle
açmayınız.
Doğru şekilde montajı yapılmamış ve tam olarak sağlıklı çalışmayan
cihazı kullanmayınız.
İlk kullanımdan önce cihaz tamamen su ile doldurulmalıdır. Cihazın suyu
herhangi bir sebeple boşaltılırsa (su tesisatında yapılan çalışma, donma
riskine karşı, tamirat, bakım vb.) cihaz çalıştırılmadan önce tekrar su ile
tamamen doldurulmalıdır.
Description of the Device
Electrical instantaneous water heaters, is suitable for both open
(unpressurized) and closed (pressure) connection. The device heats the
water as it passes through it.
When the hot water tap is turned on, instantaneous water heaters start to
operate and heats the water. When the hot water tap is turned off, the
device closes down too.
The device can not be operated with preheated water, otherwise high
temperature fuse will be blown.
Safety Precautions
This device is suitable for use in bathrooms, which is for household use or
similar to household use but not industrial, such as mutual kitchens of
shops, offices and other professional businesses and also the bathrooms of
pansions, small hotels and bathrooms of similar equipments.
Cut off water and electricity before starting the installation process.
Without disconnecting power from the device, do not ever open the lid
of the device.
Do not use devices whose Installations are not done correctly and are not
functioning well.
The device must be completely filled with water before the first use. If the
device’s is water discharged for any reason (constructional works on water
systems, against the risk of freezing, repairs, maintenance etc.) it must be
completely filled with water before running again.
EN
-22-
Summary of Contents for FLOW
Page 40: ......