Mounting of the Device
Turn off the water supply line before installation. Electric current
must be cut in the electrical connection cable. Remove the fuse from
fuse holder or turn it off.
Legal instructions, conditions regarding electricity and water distribution
institutions, specifications indicated on the label and technical values must
be complied with.
Mounting Place:
The figure above should be considered in order for the device to be placed
correctly.
For installation, from all directions around the device, there must be free
space of approximately 60 mm.
The device must be mounted vertically in a way that it will not have direct
contact with water.
In order to prevent heat loss, the distance between device and tap should
be as short as possible.
EN
-25-
Summary of Contents for FLOW
Page 40: ......