AIR CPU1001
7
oPeraTIon
General use
Before turning on the pump, ensure the fuse box (Figure 1, item 2) and
compressor switch (Figure 3) are both in the ON position. Turn on the pump
by moving the power supply switch to the ON position (Figure 1, item 4).
The pump is now ready for use.
The pump is designed with 2 LED diode boards (Figure 2). These are visible
from both sides of the pump, and indicate the pump is working.
The pump handle (Figure 2) is used to fill tires with air. The pump head
accommodates the three common valve types used on bicycle tires: Dunlop,
Schrader, and Presta. The pump can be used for any tire with these valve
types and in addition to bicycles can be used for tires on items such as
mopeds or children’s carriages.
After pumping, the compressor will automatically start to regulate pressure for
the next use.
figure 2:
Pumpview
