background image

Appendix C — Filter Manager Error/Status Codes

141

Filter Manager Error/Status Codes

-713

Error opening the Real or codec Registry.

Use RegEdit and/or RegCtr-
lPnl to check the existence 
and state of the Real and 
codec tables. 
(See Appendix B.)

-714

Error opening the Real or codec Registry.

Use RegEdit and/or 
RegCtrlPnl to check the 
existence and state of the 
Real and codec tables 
(Appendix B).

-715

Error creating main Real processing thread.

Error creating main Real 
processing thread.

-717

Conversion of an input string from Unicode 
failed.

Use RegCtrlPnl to check the 
input parameters for Real.

-718

Failed to create the in-pin from the CVPro to the 
Real component.

Ascertain that both Cin-
ProSerCom and RealEncode 
are registered, as well as 
CVProServer. Make certain 
that previous encode closed 
down cleanly.

-719

Failed to initialize in pin listed above.

-720

Real failed to compress video frame.

May have received bad data 
from CVPro. Check content 
of tape and quality of 
MPEG-2 file, if possible.

-721

Real failed to compress audio frame.

May have received bad data 
from CVPro. Check content 
of tape and quality of 
MPEG-2 file, if possible.

-723

Real engine failed during encode.

Use RegCtrlPnl to check the 
input parameters for Real.

-724

Real engine failed during setup.

Use RegCtrlPnl to check the 
input parameters for Real.

Filter Manager Error/Status Codes  (Continued)

Error Code

Meaning

Comments

Table C-1. Filter Manager Error/Status Codes  (Continued)

Summary of Contents for Argus 2000-0370-2


























































































































































Reviews: