11
14
Electric lift
Seat angling
1.3. DRIVING
1.3.1. VR2 CONTROL BOX
VELA Blues 300 is as a standard, fitted with a control box type VR2.
The wheelchair is switched on and off with the I/0 button.
To operate a function, push on the left button = electric lift
Right button = seat angling. To operate a function the joystick
is moved forwards (up) or backwards (down)
The Speed up button increases driving speed:
Push repeatedly
on the button and you will see the light indicator move to the right.
The Slow button reduces the speed:
Push repeatedly on the but-
ton and you will see the light indicator move to the left.
The control box has a hooter.
It is not possible for the user to re-program the control box.
Force to mange the joystick:
Forward/backward: 1.3Nm
Sideways: 1.0 Nm
1.3.2. R-NET CONTROL BOX (OPTIONAL)
As an optional feature, the powerchair can be equipped with a R-Net
control box. The powerchair is turned on and off on the I/0 button.
The mode button allows you to switch between the various functions:
Press the mode button once and immediately move the joystick to the
side. You will note that various indicator lights on the control box
show which (of up to five possible) functions are activated: electric
lift, seat tilt, chair back tilt, footrest right, footrest left. Every time the
joystick is moved to the side, it changes to a new function. To operate
a function, push the joystick forwards (UP) or backwards (DOWN).
Speed: The first option is to adjust speed. When the number in the
display flashes, you can increase your speed by pushing the joystick
forwards or decrease it by pushing the joystick backwards. (The speed
will appear as a number from 1 to 5 on the display.)
When you want to move again, press the mode button and the
powerchair will return to the drive position where the joystick is
pushed forwards to move forwards.
Force to manage the joystick:
Forward/backward: 1.3Nm
Sideways: 1.0 Nm
1.3.8.1. FRICTION COUPLING
Should it be necessary to tow the wheelchair, the electro-brake and
motor are disengaged by operating the two actuating handles on
the motor shield.
Note: It is not possible to drive the electric wheelchair when the
friction coupling is operated. Turn both coupling handles back so
they are positioned along the length of the wheelchair immediately
after concluded towing.
1.3.9. STATIONARY AND PARKING
Always disconnect the wheelchair immediately when driving is
concluded by pushing the I/0 button. NOTE! When the wheelchair
is switched on, it will consume power from the batteries. Therefore
it is advised to switch off after parking.
