7
1.2. TROUBLESHOOTING
Mistake
Possible cause and solution
The gait trainer cannot turn
Direction lock may be activated. See section 2.0.16.
Brake function does not work
The brake is not activated. See section 2.0.5.
Upper part hangs skewed to one side
Check that both springs are fitted correctly. See section
2.0.2. or 2.0.3.
Upper part is stuck
Check that both springs are fitted correctly. See section
2.0.2. or 2.0.3.
The gait trainer rolls badly
Wheels are blocked. Clean the wheels for wire residue
and the like.
The walking resistance brake may be activated. See
section 2.0.14.
The gait trainer cannot be walked backwards
The backstop may be activated. See section 2.0.15.
The handle is loose
Tighten the handles
The seat bracket is loose
Tighten the handle
The seat height and gait height are lower than before
Loosen the handle, move the upper part up to the
desired height and tighten the handle again. See
section 2.0.4.
Trunk support and riser are loose
Tighten the handle
The seat height is lower than before
The tilt bar is folded down. See section 2.0.10.
If the above does not solve your problem, you should contact your VELA
supplier.
E N
Summary of Contents for Meywalk 4 Micro
Page 2: ......
