Vela Tango 100S, Instructions For Use Manual

8

Note:

 Persons using a harness in 

the chair must always be supervised 
when the harness is in use.

1.5.2. TRANSPORT

When transporting the chair by 
car, airplane or any other means 
of transport, always use the chair 
brake. The chair is not approved 
for use as a passenger seat in any 
means of transportation and may 
not be used as such.

The chair is designed to be 
transported under the following 
environmental conditions: 

Temperature: - 20°C to + 60°C
Humidity: 15-95%

Allow the chair to stand for 24 hours 
before use if it has been stored 
below - 10°C.

1.6. WARRANTY

VELA grants a right of claim under 
applicable law in the country where 
the chair is acquired. The right of 
complaint applies only when using 
original spare parts and accessories, 
as well as customisations made by 
professionals.

Note:

 if an exclusive contractual 

agreement has been made directly 
with VELA, this applies!

VELA assumes no liability for da-
mages to the product or the user 
caused by: 

::

  Transportation  

::

  Misuse  

::

  Normal wear and tear 

::

  Wrong use 

::

  Use of spare parts and acces-

sories that are not original VELA 
products

::

  Adjustments made by unauthori-

sed service technicians

1.7. UNPACKING THE CHAIR

The chair comes in environmentally 
friendly and recyclable packaging.

In case of defects or transport 
damage to the chair, please contact 
your VELA supplier right away. In 
such cases, do not attempt to use 
the chair or to fix it yourself.

On delivery you have received: 

::

  VELA chair

::

  Instructions for use

::

  Charger (only for chairs with elec-

trical functions)

Note:

 see item 2.0.1 for correct 

attachment of backrest.

1.8. MAINTENANCE

We recommend an annual inspec-
tion of the chair to identify any de-
fective or worn parts. All removable 
parts should be tightened regularly. 
You can find various guides on 
www.vela.eu.