7
1.6.6. SETTING THE BACK HEIGHT
The back height is adjusted by loosening the 4 Unbrako bolts
that are placed behind the backrest arm. Once they are loose,
the height of the back can be adjusted. Remember to tighten
the Unbrako bolts securely again.
1.6.7. ADJUSTING THE ARMREST HEIGHT
Adjust by loosening both screws under the armrest bar and
adjusting the height of the armrest. Remember to tighten the
screws securely again.
1.6.8. ADJUSTING THE ARMREST WIDTH
Adjust by loosening both screws under the seat. Remember to
tighten the screws securely again.
Note:
The armrests may only be adjusted up until the red ’stop’
mark.
1.6.5. ADJUSTING THE BACKREST ANGLE
The backrest is angled by loosening the small screw on the
back bolt, after which the backrest can be adjusted to the
desired angle. Remember to tighten the bolt securely once the
correct angle has been achieved.
