VELA
TANGO
VELA
TANGO
EL
VELA
TANGO
EL
1 0
2.0.2. HEIGHT ADJUSTMENT (MANUAL)*
Adjusted by pulling up the front handle on the right-hand side.
Note:
VELA Tango 300 is available with fixed height. It is not
possible to adjust the seat height of this chair.
2.0.3. HANDHELD CONTROL*
The handheld control is used to adjust the height of the chair
via push buttons on the front.
2.0.1. HEIGHT ADJUSTMENT (EL)*
Can be operated by pressing on the switch that is located on
the side of the right or left armrest.
Note:
VELA Tango El is also available with height adjustment via
handheld control (see item 2.0.3.).
2.0.4. ADJUSTMENT OF SEAT DEPTH
The seat depth is adjusted by loosening the 2 Unbrako bolts
under the seat (next to the backrest arm), after which you will
be able to push the backrest back and forth. Remember to
tighten the Unbrako bolts securely again after adjusting the
seat depth.
2.0. USER MANUAL
The gas spring and the electric lifting mechanism
should only be replaced by a VELA technician or a
person trained in this field.
