VELA
TANGO
EL
VELA
TANGO
EL
1 4
2.0.17. STROLLING BRACKET*
Strolling bracket for transporting a person in the chair. The
strolling bracket is mounted to fittings under the seat using
two finger screws. This is also where the depth is adjusted. The
height is adjusted by pressing the two buttons on the side of
the bracket while the handle is positioned at the desired height.
2.0.19. ANGLE SWITCH (EL)*
Placed on the underside of the left or right-hand armrest as
required. Remember, position the switch correctly (see section
2.0.2.).
2.0.16. CHANGING THE SEAT
The seat can be replaced by removing the four thumbscrews
that are located in each corner under the seat.
2.0.18. CHARGING (EL)
Daily charging is recommended
. Remove the operation plug
from the back of the armrest and place it in the charger as
shown. The charger is plugged into an electrical outlet. When
the chair is charging, the LED on the charger is yellow. When
the chair is fully charged, the LED turns green.
Note
: The chair should not be used during charging.
