Velbus Signum IoT Gateway (VMBSIG-20) install guide
April 2024
Page
5
of
19
4.
To setup your Velbus installation, choose ‘Scan my installation for modules’ and ‘Auto-
assign addresses’. If the installation has already been configured before, uncheck the
‘Auto-assign addresses’ option.
5.
For a first time installation, you can start with blank modules, otherwise you select ‘Read
settings from my existing installation’. Depending on the size of your Velbus installation,
this might take a while.
6.
Save your project file, you will need it later in the process.
