- 7 -
Assembling Air gate Doors "C", "D" Fig.4
3.10.
Using the details
15-16-17-18-19
, assemble with self-tapping screws
45
the
top door
"C"
and the lower door
"D" .
Right post
16 on door "C","D"
,
960mm
(with
hinge holes)
must be right, and
17(18)
with hole for handle must be left.
Hole for the handle in the top door
"C"
should be located below, and in the
bottom door
"D"
- from above.
Insert carpenters Square and make sure it is 90°. Insert and fasten the diagonal
air gate door support
19
with screws
45
:
Doors “C”, “D”
3.11.
Insert the doors
"C", "D"
in the opening of the End-Face
"A" and "B"
, secure
with hinge
50,
bolts
43
and nuts
44:
