The identity code is a 3-digit number you can key in any number
at your discretion. This enables the recipient to know the call is
from the Voice Dialler.
^^Note : The procedure to store pager number may vary depending
on the pager system used in a specified area. The
#
represents a delay period of 5 seconds and Voice Dialler
will dial
#
. If the delay period of the pager system in your
area is more than 5 seconds, you can extend the delay
period by adding "*" before the
#
. You can add as many
"*" depending on the delay period required. Each "*"
represents a delay period of 3 seconds, but the Voice
Dialler will not dial "*". The users may change the
procedure in ^^ depending on the pager system used in
their area.
c. Store a telephone number with extension number.
Press SET
Key in priority number (1-6)
Key in telephone number
Press *
Key in extension number
Press SET
Note : 1. The telephone * key + extension number
should not exceed 20 digits.
2. The * key when pressed here represents a delay period
of 3 seconds. This means the Voice Dialler will wait for
3 seconds and will continue dialling after the delay
period is over. If you want to extend the delay period,
you can add more "*". Each "*" represents a period of 3
seconds.
