CAMIP16
V. 02 – 10/12/2014
10
©Velleman nv
10.3
Adding Your Camera to the EagleEyes App
1.
Establish a wireless connection between your mobile device and the
wireless router that has the camera connected.
2.
Open the EagleEyes app and click the “+” button to add a new device.
3.
Select “Local Network Search” to search for the camera.
The device will show a list
of devices on the network.
The displayed IP address is
the address that your
router assigned to your
camera.
4.
Select the camera from the list. The settings page appears.
5.
Change the port number of the camera as needed. The default port
number is 88. If port number 88 is blocked, you can change it to any
value between 1-9999 (for example 8080).
6.
Write down
the IP address and the port number of the camera. You
will need them later.
(In the sample screens below
[A]
, the IP address is 192.168.2.197 and
the port number is 88.)
7.
Press “Apply” to confirm your settings.
Summary of Contents for CAMIP16
Page 2: ...CAMIP16 V 02 10 12 2014 2 Velleman nv ...
Page 3: ...CAMIP16 V 02 10 12 2014 3 Velleman nv X Y ...
Page 4: ...CAMIP16 V 02 10 12 2014 4 Velleman nv Z 28a 28b 28c ...
Page 15: ...CAMIP16 V 02 10 12 2014 15 Velleman nv 4 Under Trigger set the motion detection as shown ...
