CL01
V. 01 – 17/07/2014
4
©Velleman nv
Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not
covered by the warranty and the dealer will not accept responsibility for
any ensuing defects or problems.
The LEDs are not replaceable.
Do not mix new and old batteries, or alkaline, carbon-zinc and
rechargeable batteries.
Remove the batteries when the mood light is not being used.
Keep the batteries out of the reach of children.
Do not charge your rechargeable batteries using the included USB cable
but use an appropriate battery charger instead.
Keep this manual for future reference.
4.
Features
mood light with 4 LEDs
automatic and manual colour change (with touch sensor)
5.
Operation
1.
Open the package and take out the lamp base and lampshade. Gently
click the lampshade onto the base.
2.
Power your mood light through a USB port or with batteries. To power
through USB, insert the plug into the input on the base of the mood
light and connect to a powered USB port. To power the mood light with
batteries, open the battery cover, install 3 x AA type batteries (not
included) according to the indicated polarity and close the battery
compartment.
3.
Slightly touch the on/off button once to switch on the mood light.
Every single touch on the on/off button will change the colour. Hold
your finger onto the on/off button to switch on the automatic colour
change.
4.
Touch the on/off button twice rapidly to switch off.
NOTE:
We recommend not using the USB cable and batteries at the same
time. Power the mood light either with batteries or through a USB
port.
6.
Cleaning and Maintenance
This mood light does not require any particular maintenance.
Occasionally wipe the device with a damp cloth to keep it looking new.
Do not use harsh chemicals, cleaning solvents or strong detergents.
