DVM903
V. 02
–
29/01/2020
92
©Velleman nv
10.11
ZAPAMIĘTYWANIE WARTOŚCI MAKS./MIN.
Nacisnąć MAX/MIN, aby zablokować wartość minimalną lub maksymalną.
Przytrzymać przez 2 sekundy, aby odblokować.
10.12
POMIAR WZGLĘDNY
Nacisnąć REL, aby zmierzyć wartość względną. Tryb automatycznego
ustawienia zakresu można zmienić na ręczny. Nacisnąć ponownie, aby
wyjść. Funkcja ta nie działa w przypadku pomiaru Hz/%.
11.
Wymiana baterii i bezpiecznika
UWAGA:
Aby uniknąć porażenia prądem elektrycznym, przed
otwarciem obudowy
każdorazowo
należy odłączyć przewody
pomiarowe.
Aby zapobiec zagrożeniu pożarowemu, używać
wyłącznie bezpieczników o parametrach określonych w niniejszej
instrukcji.
Uwaga:
patrz ostrzeżenie na gnieździe baterii
W urządzeniu nie występują części, które mogą być serwisowane
przez użytkownika.
W sprawie serwisowania i/lub części zamiennych należy zwrócić się
do autoryzowanego sprzedawcy.
Przed wymianą baterii lub bezpieczników odłączyć przewody
pomiarowe i wyjąć z zacisków pomiarowych.
•
Po wyświetleniu się " " należy wymienić baterię.
•
Bezpieczniki rzadko wymagają wymiany –
przepalenie się bezpiecznika
niemal zawsze jest wynikiem błędu
ludzkiego.
Wymiana baterii:
•
Wyłączyć miernik.
•
Odkręcić znajdującą się z tyłu śrubę i ostrożnie otworzyć obudowę.
•
Wyjąć starą baterię i włożyć nową.
•
Zamknąć obudowę i dokręcić śruba.
Bateria
: 1 x 3,7
V, zwrócić uwagę na prawidłową biegunowość
Bezpieczniki
: F0.8 A/1000 V, 6.75 x 33 mm, F15 A/1000 V, 6.75 x 33 mm
Przed użyciem miernika upewnić się, że obudowa jest szczelnie zamknięta i
umieścić pokrywę ochronną na miejscu.