DVR4MQAE
- 17 -
VELLEMAN
l.
Advance Menu: NETWORK
Move the cursor to the “NETWORK” and press ”ENTER”. The screen will show the following options:
1.
NETWORK TYPE (STATIC):
Select NETWORK TYPE and press “
＋
” or “
－
” button to set the network type as STATIC. Press “ENTER” to go
to the submenu of the network. In the submenu of network type, use “
＋
” or “
－
” button to set all the information
needed in the DVR. See below.
2.
NETWORK TYPE (DHCP):
This DHCP function needs to be supported by router or modem network cable with DHCP service. For detailed
DHCP setting, refer to “
10.f. Licensed Software AP
”.
3.
NETWORK TYPE (PPPoE):
This PPPoE function needs to have “username” and “password” from ISP supplier.
For detailed PPPoE setting, refer to “
10.f. Licensed Software AP
”.
NOTE
: DHCP and PPPoE network types need to apply DDNS service to get “Hostname” to correspond to dynamic
IP address. For detailed DDNS setting, refer to “
10.f. Licensed Software AP – DDNS
”.
m.
Advance Menu: BACKUP
Move the cursor to the “BACKUP” and press ”ENTER”. The screen will show the following options:
Select “USB BACKUP” and press “ENTER”.
1.
START TIME:
Select the start time of the backup.
2.
END TIME:
Select the end time of the backup.
NETWORK
NETWORK TYPE
STATIC
DNS
192.168.001.010
PORT
8 0 0 0
STATIC
IP
192.168.001.010
GATEWAY
192.168.001.0
→
255
NETMASK
252.252.252.000
BACKUP
USB BACKUP
USB BACKUP
START TIME
2005-10-27 11 : 25 : 46
END TIME
2005-10-27 11 : 50 : 58
AVAILABLE SIZE
0512 MB
CHANNEL
05
HDD NUM
MASTER
BACKUP TO USB
START
