DVR4MQAEB
- 29 -
VELLEMAN
SEARCH LIST
1. HDD Number:
Select the hard disk (master)
2. List Type:
Select the list type
(all/manual/system/alarm/motion)
3. Max. list number:
Max. list number (128)
4. Download HDD List:
Press this button
to download the list.
ALARM
1. Alarm Trigger
:
Enable or disable the email and FTP notification
function.
2. Alarm Method
:
Two notification methods: email and / or FTP.
3.
Post Number
:
Set the MJPEG pictures (1-10 pictures).
4.
Alarm Duration
:
Set the duration time of the motion trigger recording
(5 sec., 10 sec., 20 sec., 40 sec.).
5.
Alarm Refresh
:
Clean the alarm message “
”shown on the screen.
NOTE:
Email Notification:
MJPEG pictures will be made at your
designated space set in “File Path”,
plus an email containing the MJPEG
pictures (1-10 pictures) will be sent to
the address which is set under “Mail”.
FTP Notification:
MJPEG pictures will be made at your
designated space set in “File Path”, plus
an FTP file containing the MJPEG
pictures (1-10 pictures) will be sent to the
address which is set under “FTP”.
GENERAL
1.
Get the information of DVR firmware version in this
window.
2.
Select “Turbo Step” (1 - 10)
.
To speed up menu selection or the control of the PTZ
camera under video web server, you can activate
"Turbo" function by clicking this button. You are
allowed to change the turbo steps from 1 to 10.
Example: If the value of turbo step is “5“, it means that,
when you press one of the buttons up/down/left/right, one click is equal to clicking 5 times.
3.
Max Log List
:
Set the maximum number of log list.
4.
Server Log
:
Press “Server Log” button to enter the server log list window.