HAA920
19.08.2014 – v. 3
©Velleman nv
8
3. Door Lock Out
1. Time Setting
2. Lock Register
3. Time Group Set
4. Unlock Group
5. Unlock Time No
6. Lock Type Set
7. Access Mode
•
Machine No.:
Use number keys or “
▲
”“
▼
” key to enter the number of devices (machines). For
those using only 1 device, use the factory default (1). When multiple devices are used, the
number must be exactly the same as the number set in the software.
•
Manager:
set the number of Managers allowed on the system; default value is 5. In attendance
software, ordinary user can be permitted to be manager, please refer to Software Guide for
operation details.
•
Select Language:
set up the screen language.
•
Select Voice:
select the voice notification.
To remind the user whether the operation was correct or not by LCD display or voice notice
Select voice on:
after a correct operation, the device will give a voice notice “Thank You”.
After a failed operation, the device will give a voice notice “Press Again”
Select voice off:
after a correct operation, a short “Bi, bi, bi…” sound can be heard. After a
failed operation, the device will give a long “Bi---” sound.
The device will resume work after 2 seconds or user can press either key to resume normal
operation immediately.
•
LCD Backlight:
set the screen contrast.
•
Auto Shut Down:
set up the auto shutdown function of the device, default setting is “off”. A
time limit is set to determine after how much time without any operation the device will shut
down.
•
PKey use:
Enable or disable the power button on the front of the device.
•
Use the “
▼▲
” or number keys to select the “Verify” menu and press OK.
•
Verify Fingerprint / Password:
set verification method(s).
•
Initialization:
reset the programmed data to initial factory default values.
•
Management Records Warning:
setup the device to give users a warning when the total
manager record is almost full.
•
Attendance Records Warning:
setup the device to give users a warning when the total
attendance record is almost full.
•
Repeat Confirmation Time
: check whether the users have signed in or out repeatedly during
the set time period to avoid double entries.
•
Door Lock Output:
set whether the machine needs the door lock function and the time during
which the door lock control signal must remain on.
5.10.2.6 Information
Provides a way for the users to check the existing registration records, attendance records and
system details.
1. Storage Detail
2. Record Detail
3. System Detail
•
Storage Details:
to show the current registered data stored on the machine. Including the
number of registered user; the number of registered manager; number of registered fingerprints
and number of registered passwords.
•
Records Details:
consist of 5 options: the current attendance records, management records,
view attendance records, view management records and delete all records.
•
System Details:
– consist of 6 options: manufacturer; device name; release time, serial
number, Engine version and software version.
