8
Construction
First:
Bend the leads exactly like the drawing.
Next:
Solder
one
lead, and check the position, if necessary correct by heating
the soldering.
Last:
Solder the second connection.
q
LD1
q
LD2
q
LD3
q
LD4
q
LD5
17. Mounting the LED’s. Check the polarity ! Short lead = Cathode or -
!
IMPORTANT
Mount these LED’s exactly like in the
drawing, otherwise some LED’s will not
fit correctly in the front panel.
Please also use the front panel as a po-
sitioning reference.
CATHODE
LD...
LD...
CATHODE
11mm
7mm
7mm
