VDP250SC8M2
Rev.
04
08.01.2010
©Velleman nv
6
e.
Stand-Alone Mode
In stand-alone mode, your
VDP250SC8M2
can be used without controller. The scanner is equipped with
a built-in microphone which allows a sound-controlled operation. Select the “Master mode” to use this
function.
f.
Master/Slave Mode
This operation mode allows all slave devices to operate synchronously with the master device. Connect
the DMX out of one device to the DMX in of the next using a cable with XLR jacks. Set the master device
to “No DMX sound” or “No DMX auto”. Set the address of all slave devices to 1.
g.
DMX Mode
All DMX-controlled devices need a digital start address so that the correct device responds to the signals.
This start address is the channel number from which the device starts to “listen” to the DMX controller.
Enter the correct number and read it from the display located on the base of the
VDP250SC8M2
.
You can use the same starting address for a whole group of devices or enter an individual one for every
device. When all devices have the same address, all the
VDP250SC8M2
s will “listen” to the control
signal on one particular channel. In other words: changing the settings of one channel will affect all
devices simultaneously. If you set different addresses, each device will “listen” to a separate channel
number. Changing the settings of one channel will only affect the device in question.
In the case of the 8-channel
VDP250SC8M2
, you will have to set the start address of the first
VDP250SC8M2
to 1, the second
VDP250SC8M2
to 9 (1 + 8), the third to 17 (9 + 8) and so on.
h.
Detailed DMX Values per Channel
Channel Function From
To
Description
1 Shutter,
strobe
0
128
Gradual dimmer adjustment from 0 to 100%
129
133
No function (shutter open)
134
243
Random strobe effect with decreasing speed
244 249
Shutter
closed
250 255
Shutter
open
2 Colour
wheel
0 15
White
16 31
Magenta
32 47
Yellow
45 63
Orange
64 79
Green
80 95
Red
96 111
Blue
112 127
Violet
128
191
Forwards rainbow effect with increasing speed
192
255
Backwards rainbow effect with increasing speed
3
Rotating gobo
wheel
0 15
Open
16 31
Gobo
1
32 47
Gobo
2
48 63
Gobo
3
64 9
Gobo
4
80 95
Gobo
5
96 111
Gobo
6
112 127
Gobo
7
128
191
Forwards gobo change with increasing speed
192
255
Backwards gobo change with increasing speed
4 Gobo
rotation
0 15
No
rotation
16
135
Forwards gobo rotation with increasing speed
136
255
Backwards gobo rotation with increasing speed
5 Pan
-
-
Push slider in order to move the mirror
horizontally. Gradual mirror adjustment from
one of slider to the other (0-255, 128-center).
Mirror can be stopped at any position.
