Pagina 7 van 12
(rev.1)
Learning a remote
1. Learning a RF remote
(VM118R / K8058 / VM160DT / VM160T)
Learning a RF remote is only possible when the RF-receiver is mounted.
(art. RX433N).
2. Learning a IR remote
(K8049)
Keep push button SW15 pressed while
transmitting with the remote. The LCD display will
blink twice to confirm that the remote is learnt
See section “mode selection” in the manual of K8049 for
setting the remote on “MODE 4”.
The remote is now ready to be used.
Attention: Learning a remote erase the
previous saved remote.
Data
GND
+5V
Antenna
20cm
Data
GND
+5V
“SW15”
Learn RF remote
SHIFT