LABPS1502AN
V. 02
–
14/12/2022
4
©Velleman Group nv
•
Do not disassemble or open the cover of this appliance under any circumstances.
Touching live wires can cause life-threatening electric shocks. Apart from the fuse,
there are no user-serviceable parts.
•
This appliance will heat up during use. Make sure the ventilation openings are clear
at all times. For sufficient air circulation, create a 25 mm clearance in front of the
ventilation openings. Ensure the appliance is installed on a flat, heat-resistant
surface. Do not place the appliance on carpet, fabric or any other flammable
surface.
•
Always disconnect the appliance from the mains power when not in use. Handle the
power cable by the plug only.
•
Keep this appliance away from dust and extreme temperatures.
•
Avoid brute force when operating the device. Do not drop it.
•
Immediately discontinue use if you notice any damage to the appliance or cables.
Do not attempt to repair any damage yourself.
3.
General Guidelines
•
Refer to the Velleman
®
Service and Quality Warranty on the last pages of this
manual.
•
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
•
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
•
Nor Velleman Group nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect)
–
of any nature (financial, physical…) arising
from the possession, use or failure of this product.
•
Keep this manual for future reference.
4.
Overview
Refer to the illustrations on page 2 of this manual.
#
Function
Description
1
voltage display
indicates the output voltage
2
current display
indicates the output current
3
+ output
used for the connection of the load's positive terminal
4
- output
used for the connection of the load's negative terminal
5
on-off switch
6
current knob
rotary switch for the adjustment of the output current
7
voltage knob
rotary switch for the adjustment of the output voltage
