PCTV2
V. 02 – 12/09/2013
4
©Velleman nv
•
All modifications of the device are forbidden for safety reasons.
•
Only use the device for its intended purpose. Using the device in
an unauthorised way will void the warranty.
•
Damage caused by disregard of certain guidelines in this manual
is not covered by the warranty and the dealer will not accept
responsibility for any ensuing defects or problems.
•
Do not disconnect the device during formatting or upgrading.
Disconnecting the device may cause system errors.
•
Clean the device with a dry, lint-free cloth. Do not use alcohol or
solvents.
4.
Overview
Refer to the illustrations on page 2 of this manual.
1
HDMI port
4
USB OTG port
2
reset button
5
micro USB power port
3
micro SD port
6
USB port
5.
Connecting the device
The device has the following ports and buttons:
HDMI port
Plug the HDMI port of the device directly
to the HDMI port of your TV, monitor or
beamer, no cable needed.
Micro SD port
Expand the memory of the device with a
micro SD card (max. 32 GB)
USB OTG port
Use the included adapter to connect the
device to your pc (for example for data
transfer) or any USB device (mouse,
keyboard…).
Micro USB power
port
Connect the device with the included to
USB power cable to your TV for charging.
USB host port
Connect any USB device to this port
(mouse, keyboard…).
6.
Start using the device
To start using the device:
1.
Connect the device on the HDMI port of your TV, monitor or
beamer.