VTSSC10N
V. 02 – 06/02/2013
3
©Velleman nv
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If
in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
This soldering station is temperature-controlled: sophisticated circuitry regulates the temperature between
150 °C and 420 °C.
The VTSSC10N is a 48 W soldering station with a temperature sensor in the ceramic heating element. The
heating element is supplied with the necessary power via a safe 24 V transformer, while the bit is completely
isolated from the mains. The control circuitry ensures that devices sensitive to static charges cannot be
damaged during the soldering process. The included bit consists of a copper core that is protected by a steel
coating.
2.
Safety Instructions
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Do not use near inflammable products or in explosive atmospheres. Only use in properly ventilated
rooms.
Do not touch the shaft or soldering tip as this can cause serious burns. Always return the soldering
iron to its stand between uses; always let it cool down after use and before storage.
Incorrect use
may cause fire.
Always disconnect the mains power when the device is not in use or when maintenance activities are
performed. Handle the power cord by the plug only. Do not crimp the power cord(s) and protect
against damage. Have an authorised dealer replace it if necessary.
Do not inhale solder fumes. Dispose of solder residue in accordance with local regulations.
Never use the device on live electronic circuits. Make sure power to the work piece is cut and
capacitors are discharged.
Warning: this tool must be placed on its stand when not in use; do not leave the tool
unattended when switched on.
3.
General Guidelines
Refer to the
Velleman® Service and Quality Warranty
on the last pages of this manual.
Indoor use only
. Keep this device away from rain, moisture, splashing and dripping liquids.
Never put objects filled with liquids on top of or close to the device.
Keep this device away from dust and extreme temperatures. Make sure the ventilation openings
are clear at all times.
Protect this device from shocks and abuse. Avoid brute force when operating the device.
Familiarise yourself with the functions of the device before actually using it.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications to
the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised way will void the
warranty.
