VTSSD4
V. 01
–
15/05/2014
3
©Velleman nv
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could
harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it
should be taken to a specialized company for recycling. This device should be returned to your
distributor or to a local recycling service. Respect the local environmental rules.
If
in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into service. If
the device was damaged in transit, don't install or use it and contact your dealer.
2.
Safety Instructions
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children shall be supervised to ensure that they do not play with the appliance.
Do not crimp the power cord and protect it against damage.
Warning!
If the power cord is damaged, it must be replaced by the manufacturer, its service
agent, or similarly qualified persons in order to avoid any hazard.
Make sure that the available voltage does not exceed the voltage stated in the specifications of this
manual.
Plug the power cord into a suitable,
earthed
mains outlet.
Risk of electroshock
when opening the cover. Touching live wires can cause life-threatening
electroshocks. Do not disassemble or open the housing yourself. Have the device repaired by
qualified personnel.
Do not operate the device with wet hands.
Always disconnect mains power when the device is not in use or when servicing or maintenance
activities are performed. Handle the power cord by the plug only.
Caution!
After switching off,
leave the power cord plugged in
for a few minutes. When you
switch off the unit, the automatic cooling function blows cooling air through the heater pipe for a
short period. This protects the heater from damage and extends its lifetime. Do not disconnect the
mains plug during this cooling process.
Indoor use only
. Keep this device away from rain, moisture, splashing and dripping liquids. Never
put objects filled with liquids on top of or close to the device.
Do not use near inflammable products or in explosive atmospheres. Heat can cause fire to
inflammable products even when they are not in sight. Only use in properly ventilated rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips, or hot air gun as this can cause serious burns. Keep the tips and hot
air away from the body, clothes, or other flammable material. Do not aim the hot air gun at the
eyes. Use gloves and/or heat-resistant tools to pick up the PCB assembly to prevent burns. Always
return the irons and gun to their stands between uses; always let the device cool down after use
and before storage.
Place the device on a level, stable, and fire resistant working surface.
Do not inhale solder fumes. The vapours that are released during soldering are harmful. Therefore,
you shall only use the soldering station in well-ventilated areas or under an exhaust hood (solder
fume extractor). Dispose of fume filters and solder residue in accordance with local regulations.
Never use the device on live electronic circuits. Make sure power to the work piece is cut and
capacitors are discharged.
Do not block the hot air gun nozzle. This may cause heat reflection and may damage the heating
element.
Caution!
Before the first use, make sure that the pump is unscrewed from the base plate.
Refer to
Installation
for more information.
Warning!
This tool must be placed on its stand when not in use; do not leave the tool unattended
when switched on.
