VTSUSB
V. 01 – 06/06/2017
2
©Velleman nv
USER MANUAL
1.
Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be returned
to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
2.
Safety Instructions
This appliance can be used by children aged from 8 years and above, and persons with
reduced physical, sensory or mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning the use of the device in a
safe way and understand the hazards involved. Children shall not play with the device.
Cleaning and user maintenance shall not be made by children without supervision.
Indoor use only
. Keep this device away from rain, moisture, splashing and dripping
liquids. Never put objects filled with liquids on top of or close to the device.
Do not use near inflammable products or in explosive atmospheres. Heat can cause
fire to inflammable products even when they are not in sight. Only use in properly
ventilated rooms.
Incorrect use may cause fire.
Do not touch the shafts, tips as this can cause serious burns. Keep the tips away from
the body, clothes, or other flammable material. Do not aim at the eyes. Use gloves
and/or heat-resistant tools to pick up the PCB assembly to prevent burns. Always
return the iron to its stands between uses; always let the device cool down after use
and before storage.
Place the device on a level, stable, and fire-resistant working surface.
Do not inhale solder fumes. The vapours that are released during soldering are
harmful. Therefore, only use in well-ventilated areas or under an exhaust hood (solder
fume extractor). Dispose of fume filters and solder residue in accordance with local
regulations.
Never use the device on live electronic circuits. Make sure power to the work piece is
cut and capacitors are discharged.
Warning!
This tool must be placed on its stand when not in use; do not leave the tool
unattended when switched on.
Use the soldering iron on a heatproof workbench.
Place the soldering iron in its holder after use.
Let a hot soldering iron cool down naturally and do not immerse in water.
