3
2. Tighten the red knob until the
flash is secure.
1. Turn the red knob
counterclockwise until the shoe
mount is open wide enough to
accommodate the flash.
3. Connect your flash to your
camera with the appropriate
sync cord for your model of flash
and camera (not included). Sync
cords can be obtained from your
photo equipment dealer.
MOUNTING THE FLASH
The Vello Rotating Flash Bracket features an adjustable cold shoe.
FEATURES DIAGRAM
Locking Knob
Shoe Mount
Flash Rotating Arm
Mounting Plate
1/4
"
-20 Camera
Mounting Socket
Alignment Guide Mark
Upright Arm
Tripod 1/4
"
-20 Socket
2. To move from horizontal
(landscape) to vertical (portrait)
positioning, grasp the flash unit
near the shoe mount and pull the
rotating arm down clockwise.
3. At the same time, turn the camera
to vertical orientation.
1. The Vello Rotating Flash Bracket
allows you to hold your camera
as you normally would, right
hand holding the camera, ready
to press the shutter button.
ROTATING THE FLASH
Thank you for choosing a Vello Rotating Flash Bracket. The Vello CB-300
Rotating Flash Bracket accepts SLR and medium format cameras, allowing
you to position a flash directly above the lens in horizontal or vertical
orientation. The adjustable flash shoe is capable of accommodating almost
any portable flash.
The bracket is all metal yet lightweight. It includes a cork pad to prevent
the camera from slipping on the mount. The height of the upright arm of
the bracket is adjustable. There is also a 1/4
"
-20 socket for tripod
mounting. Integrated feet allow you to securely set your camera down
mid-session. Please follow the instructions below to get the most out of
your Vello Rotating Flash Bracket.
INTRODUCTION
