16
·
Connect your hard disk drive properly to the port
connector on the HDD enclosure
·
Connect the enclosure to your computer by USB cable
·
The computer should now detect the new hardware .For
Windows2000
®
/XP
®
/VISTA
®
/7
®
/8
®
/10
®
, no driver setup
is necessary, Please Proceed to step 6.0 to format your
drive.
·
Connect the AC adapter to the enclosure and power up
the enclosure
6.0 Hardware Installation/ Deinstallation
Windows
®
2000
®
/X
®
P/VISTA
®
/7
®
/8
®
/10
®
·
No driver installation is necessary.
·
The enclosure will be found on your computer
automatically.
IMPORTANT: Each time before unplugging the HDD
enclosure from your computer, you should stop the hardware
from the system tray (located at the right-bottom corner of
your computer screen). If you directly pull out the USB cable
without STOP operation, it may cause data loss or hardware
damage.
