9
To start your Cruz, press the on/off button located on the top left corner of
the device. When you first turn on the Cruz, you will be greeted with a CRUZ
logo, and then your Home screen.
The display has a screen timeout by default set
to 5 min. If the unit is left inactive for that period
of time, the screen will go dark as if turned off.
However, it is simply in standby mode. Tap the
power button and a screen will appear with
a green padlock button on the lower lefthand
corner. This is your Lock Screen. Drag the
padlock to the right to unlock.
The battery should have a nominal charge
on it out of the box and should charge fairly
rapidly. Charge your T410 via micro-USB
cable connected to the included AC Adapter.
Battery life will vary due to many conditions, especially when using Wi-Fi and
maximum screen brightness.
Sleep Mode and Powering Down
To save battery, you should put your Cruz in sleep mode by turning off the
LCD display. To do this, tap (not hold) the power button. Tap again to bring up
the lock screen. In standby mode, the battery still discharges as the device
continues to run. To turn off your Cruz completely, press and hold the power
button until the “Tablet options” dialog appears and tap “Power off.” You
should then see a dialog box that reads: “Your tablet will shut down.” Tap
“OK” and your device will proceed to shut down.
Getting Started
III. GETTING STARTED