28
www.velocitymicro.com/support
NoteMagix M10 User’s Guide
3.3 Configuring Your Screen Display
The VGA display function of your NoteMagix M10 contains RAM-based Digital-to-Analog Converter (RAMDAC) that
transforms the digital data from the graphics and video subsystems to analog data for the CRT monitor. This controller
offers a large set of extended functions and higher resolutions especially useful when you are connecting an external
high-resolution and high-frequency CRT or LCD.
Possible Display Configurations
The table below shows you the possible display resolution settings for using either the LCD display or an external
monitor:
Display
Possible Resolution
Maximum Colors
Widescreen
10.1” WSVGA LCD
1024 x 600
16 million colors
Monitor Only
(Maximum resolution)
1600 x1200
16 million colors
65,536 or 64K colors is equivalent to 16-bit high color while 16 million or 16M colors is
equivalent to 32-bit true color.
You can use the <Fn> + <F3> hot-key to switch the display between LCD only, CRT only, or
both LCD and CRT display.