42
www.velocitymicro.com/support
NoteMagix M10 User’s Guide
Can’t be recharged after
connecting AC Adapter
Check temperature of battery pack’s surface. The battery pack can’t be recharged if its
temperature is too high or too low.
If battery pack is fully discharged, it may take several hours to charge
If the power indicators of the battery pack will not light up, the battery may have reached the end
of its life cycle. Please contact Velocity Micro customer care.
Battery life is not as long as it
should be
Battery life depends on the using conditions of the M10. You can change the settings in Power
Manager of Windows XP to save power.
Many short charges may shorten the batteries operating time. Power the M10 by battery pack
until its power drops to a critically low level and the M10 emits a high-pitched beep or displays a
warning message. Recharge the battery fully to extend operating life.
Keyboard
Problem
Solution
Press character keys but number
displayed instead of character
Check if <
Num Lock
> is activated. Press <
Fn
> + <
Num Lock
> and make sure the indicator
of Num LK key isn’t on.
Hard disc drive (HDD)
Problem
Solution
HDD won’t boot
Operating system may be corrupted by incorrect operation or virus. Try to clean the virus using
antivirus software.
You may be experiencing an error in Windows XP. Contact Velocity Micro customer care.