www.velocitydetection.com Doc: GLT-322-7-26 Issue: 001 Date: 22/06/2021
ZT-SSPK24WLP*
Wall Mount Speaker with Selectable Strobe
1. Supply power to the system control panel. The auxiliary signaling device should not be activated.
2. If the signal is activated: a. Check all smoke and fire detectors in the system to make sure they have not been activated. b.
Check all wiring connections to make sure the signal detection circuits are not reversed or shorted together. Check wire color
codes and traces.
3. To test the SSPKCLP Series and other signaling appliances, trip the auxiliary panel, activate alarm circuit at the main control
panel or activate one of the fire detection units in the system. All auxiliary signals should be activated. 4. An operational test on
this product should be conducted in accordance with National Standards or at a minimum annually and more often if dictated by
local and state codes or authorities having jurisdiction.
SIGNALING APPLIANCE LIMITATIONS:
Your speaker meets or exceeds current audibility requirements of Underwriters
Laboratories. However, if the appliance is located outside a bedroom it may not wake up a sound sleeper, especially if the room
door is closed or only partially open.
THIS APPLIANCE WILL NOT OPERATE WITHOUT ELECTRICAL POWER. AS FIRES FREQUENTLY CAUSE POWER INTERUPTIONS,
PLEASE DICUSS FURTHER SAFEGUARDS WITH YOUR LOCAL FIRE PROTECTION SPECIALIST.
Velocity Detection over Time Zeta Alarms Ltd
declares that this product is free from defects in material and workmanship and it will repair or replace any product or part
thereof which proves to be defective in workmanship or material for a period of twelve (12) months from the date of purchase but not to exceed eighteen (18)
months from the date of manufacture.
Please contact
Velocity Detection over Time Zeta Alarms Ltd
directly for a return
merchandise authorization (RMA) number before returning goods under warranty. Shipment must be prepaid and
Velocity Detection
over Time Zeta Alarms Ltd
will repair or
replace the product if the failure was caused by a manufacturing defect.
Limited Warranty
Mounting Rough-In Box & Run Wiring
Checkout & Troubleshooting
