BassMatrix Series Manual
w w w . c h r y s a l i s a c o u s t i c s . c o m
8
P H A S E -
These buttons allow you to optimize the subwoofer performance for the location and your listening position. Select the switch position at
which you hear the most bass. The light will blink according to the following schedule:
0 degrees 1
blink
90 degrees
2 blinks
180 degrees
3 blinks
270 degrees
4 blinks
L I G H T -
If you wish, you can deactivate the blue front panel light on your BassMatrix unit. To do this, press the LIGHT button on your remote.
The light will turn off. To reactivate the light, press the LIGHT button again.
N I G H T -
Night mode limits the maximum dynamic output of the subwoofer for later night listening or to be more considerate of close neighbors.
Press the night button to turn the night mode feature on or off. Activation of night mode causes “n” to appear briefly on the display.
When night mode is deactivated, the display shows “n off ” and then returns to normal function.
V O L U M E C o n t r o l -
This control allows you to balance the output from the subwoofer to the main speakers in your system. This control should be set to
achieve similar volume level from between both the main speakers and subwoofer. When pressing volume up or down, the speed at
which the power light blinks indicates subwoofer volume - the faster the blinking, the louder the unit plays. after the volume blinking
stops. the unit will blink out the actual volume number. Slower blinks represent tens, and faster blinks represent ones. So, for example, if
the volume were set at 34, after the rapid blinking stopped you would observe three slow blinks followed by four faster blinks, indicating
a volume of 34.
Note:
The volume can also be adjusted via the buttons on the back panel of the subwoofer. These buttons have the same effect as pressing
the up and down volume buttons on your remote. The unit comes preset from the factory with the volume set at 30% of maximum setting.
P R E S E T S -
There are four presets, consisting of Movies, R&B – Rock, Jazz – Classical, and Games. As a preset is chosen, the light flashes the
corresponding number of times. The presets provide the following characteristics for bass reproduction:
Movies:
Maximum output and impact for explosions and other action adventure movie content.
R&B – Rock:
Provides the driving bass found in today’s rock music.
Jazz – Classical:
The tightest, cleanest, lowest distortion bass.
Games:
Maximum loudness available for the impact of video games.
