background image

www.velodyneacoustics.com

User’s Manual

Deep Blue Series

i

Caution

To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified 
service personnel.

The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the 
product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point symbol is intended to alert the user to the presence of important operating and maintenance (servicing) 
instructions in the literature accompanying the subwoofer.

1.

Read Instructions 

— All safety and operating instructions should be read before the product is operated.

2.

Retain Instructions 

— The safety and operating instructions should be retained for future reference.

3.

Heed Warnings 

— All warnings on the product and in the operating instructions should be adhered to.

4.

Follow Instructions 

— All operating and use instructions should be followed.

5.

Water and Moisture 

— The product should not be used near water — for example, near a bathtub, washbowl, kitchen sink, 

laundry tub, in a wet basement, near a swimming pool or the like.

6.

Carts and Stands 

— The product should be used only with a cart or stand recommended by the manufacturer.

7.

Wall or Ceiling Mounting 

— The product should be mounted to a wall or ceiling only as recommended by the manufacturer.

8.

Ventilation 

—  The  product  should  be  situated  so  that  its  location  or  position  does  not  interfere  with  its  proper  ventilation.  For

example, the product should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed
in a built-in installation such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.

The mains plug is used as disconnect device, the disconnect device shall remain readily operable.

10.

The equipment shall be used at maximum 35 degree C ambient temperature.

11.

This equipment must be supplied from a power system providing a PROTECTIVE EARTH Connection and having a neutral connection, which

can be reliable identified.

12.

Heat 

— The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products that

produce heat.

13.

Power Sources 

— The product should be connected to a power supply only of the type described in the operating 

instructions or as marked on the product.

14.

Grounding or Polarization 

— This product may be equipped with a polarized alternating-current line plug (a plug having one blade 

wider

than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully 
into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not 
defeat the safety purpose of the polarized plug.

15.

Power-Cord Protection 

— Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed 

upon or

against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the product.

16.

Cleaning 

— The product should be cleaned only as recommended by the manufacturer.

17.

Nonuse Periods 

— The power cord of the product should be unplugged from the outlet when left unused for a long period of 

time.

18.

Object and Liquid Entry 

— Care should be taken so that objects do not fall and liquids are not spilled onto the enclosure.

19.

Damage Requiring Service 

— The product should be serviced by qualified service personnel when:

a.

The power-supply cord or plug has been damaged.

b.

Objects have fallen or liquid has been spilled into the product.

c.

The product has been exposed to rain.

d.

The product does not appear to operate normally or exhibits a marked change in performance.

e.

The product has been dropped or damaged.

20.

Servicing 

— The user should not attempt to service the product beyond what is described in the operating instructions. All other 

servicing should be referred to qualified service personnel. Refer all servicing to qualified service personnel. Servicing is required when the 
apparatus has been damaged in any way, such as a power-supply cord or plug is damaged, liquid has been spilled or objects have 
fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

21.

Lightning 

— For added protection for the product during a lightning storm or when it is left unattended and unused for long periods 

of

time, unplug it from the wall outlet.

22.

Overloading 

— Do not overload wall outlets, extension cords or integral convenience receptacles as this can result in a 

risk of fire or electric shock.

23.

Attachments 

— Only use attachments and accessories specified by the manufacturer.

24.

Voltage 

— Insure that the subwoofer is only connected to the rated source voltage. Do not connect the 120-volt version to 

220.Volts or vice-versa. This will result in damage to the subwoofer and possible injury to the user.

CAUTION: 

To prevent electrical shock, match wide blade of plug to wide slot, fully inserted.

Summary of Contents for Deep Blue Series



















Reviews: