• Built-in 2000 watts Dynamic/1000 watts RMS high efficiency
Class D amplifier
• Adjustable (40 to 120 Hz) low-pass crossover (defeatable)
• Line-level (RCA) inputs and outputs
• Speaker-level inputs with five way binding post connections
• Signal sensing auto turn on/off (defeatable)
• Variable volume control
• Selectable phase control (0, 90, 180 or 270 degrees)
• Frequency response of 28-120 Hz (SPL-800R),
24-120Hz (SPL-1000R), 22-120Hz (SPL-1200R),
20-120Hz (SPL-1500R),
• Magnetically shielded for video use (SPL-1000R, SPL-1200R
and SPL-1500R)
• Multiple staggered low-pass crossovers; 12 dB/octave initial,
48 dB/octave ultimate
• Driver Displacement Control circuit to prevent over excursion
and amp clipping
• Blue power indicator LED
• High-excursion EPDM rubber surround
• Oversized spider for linearity at high excursion
INSTALLATION
Your new Velodyne subwoofer provides for a number of
installation options. Read all the installation information below in
order to determine which installation option is best for your
system. Remember to perform all installation procedures with
system power turned off.
3
