杭州威狐智能科技有限公司
Hangzhou VeloFox Intelligent Technology Co,. Ltd.
文件编号
版本号
1.01
第
10
页
/
共
27
页
communication connection is established, display enters the main interface, showing real-time
information stored in the controller and battery BMS according to communication protocol. (Battery
indicator will not show battery percentage if BMS info is not available)
Other function interfaces
Function interface
Ⅰ
Function interface I mainly displays speed information, including average speed, maximum speed
and TRIP info which is subtotal mileages as shown on basic interface. Speed display value has 3 digits,
maximum value is 99.9KM/H, including one digit after the decimal point. Subtotal mileage TRIP value
has 4 digits, including one digits after the decimal point. After 9999.9 KM is exceeded, the decimal
point is not indicated, and a 5-digit mileage value is displayed directly, with a maximum value of
99999km. After the maximum value is exceeded, the value is shown as the actual mileage value
deducted by 100,000.
Data on function interface I can be cleared by a key operation
Function interface
Ⅱ
The function interface II mainly displays mileage information, including endurance mileage and total
mileage information. The endurance mileage is calculated by controller based on battery BMS capacity.
If the controller does not provide the endurance mileage info, it will be displayed as 000.0KM. Total
mileage is usually 4 digits, including one digit after decimal point. After 9999.9KM is exceeded, the
decimal point is not indicated, and a 5-digit mileage value is displayed directly, with a maximum value
of 99999km. After the maximum value is exceeded, the value is shown as the actual mileage value
deducted by 100,000.
