杭州威狐智能科技有限公司
Hangzhou VeloFox Intelligent Technology Co,. Ltd.
文件编号
版本号
1.01
第
17
页
/
共
27
页
7.
Setting Function
Display provides specific parameter setting functions. The optional items of setting function will
be deleted according to different market and product standards. The following is the complete
parameter setting, information reading function description under the default state of display. Please
contact our sales and technical support team for confirmation in case of any discrepancies.
Within 10s after turning on display, long press M button to enter setting interface, short press
、
button to switch between setting interfaces. In any setting interfaces, short press M button to enter
parameter editing state, the triangle cursor on the right side indicates parameter picking state. Except
for the first-level, parameter setting mode is indicated by parameters shown on white background, as
shown below
：
Short press
、
button to edit parameters. Long press M button to confirm parameter selection.
Long press M button again to exit and return to previous page.In any interface of the setting mode,
short press M to enter next level, and long press M button to return to the previous menu.
Setting interface firstly enter the first-level parameter setting interface, description of each pareameter
is as follows:
Setting
items
Interface
Description
Setting data
Remark
Unit
Setting
UNIT=Unit
Value=KM/H
MPH
Defalt
Value=KM/H
KM/H—Metric
MPH—
Imperial
Triangle cursor indicates
parameter picking state
White background
indicates selected
parameter
