●
The sensor should face the computer, the
distance between sensor and computer should
be no more
than
90cm(refer to Fig.M), the angle
should be no more
than 30
°
(refer to Fig.N).
6
7
FIG. M
FIG. N
M
ax 9
0c
m
Max 30
°
Please test the computer to see if it works well
after installation. If necessary, adjust the position or
angle of the computer and sensor.
Fig. I
Screw
Sensor lock belt
Bolt
Fig. J
Rubber
slip
Tighten
up
Tighten the screw
clockwise
(Loose it anticlockwis
VS 2131 WIRED SENSOR INSTALLATION
As shown in (Fig.I) connect the locking belt and
sensor together.
As Shown in (Fig J) attach the sensor bracket to the bike frame
and pad out with rubber slips if needed. Tighten the screw
clockwise to secure in place.
VS 213 WIRELESS SENSOR INSTALLATION
