14
Steps
➢
5 steps can be set for each method.
➢
All steps are programmable with speed, timer, ramp, and intermittent mode.
➢
A Method is considered set when at least speed and timer are set for one step.
Figure 12
➢
Rpm: set point speed
➢
Time: countdown performed for each step visualized also on the main screen
➢
Ramp: if
is selected, Controller stirs for all the time at the speed set
if
is selected, Controller reaches the speed set in time selected
➢
Interm. Mode: if YES is selected, but no intermittent mode is set for the method, Controller works in
continuous mode.
