- 29 -
User Manual
Athena
English
COUNTDOWN PROGRAM
• By the countdown program it is possible to schedule system switch-on and switch-off
on a certain date.
• As for details on configuring the countdown program, refer to the "Timer
programming" section on page 36.
NOTE: the countdown program cannot be enabled if the extension program is
already enabled.
PROGRAMMING MENU
• All the device's operating parameters can be selected by 8 programming menus.
• To access the programming menu, press the
[OK]
key from normal operation mode.
Use arrow keys and to scroll the menu.
• The menus are as follows, in the order in which they are listed:
Date and time setting, Winter/Summer time switching
Daily programming
Temperature programming
Timer programming
Programming of zone control parameters
Advanced programming
Battery status
Programming ON/OFF
• Every menu may contain various selectable parameters: use arrow keys and to
scroll all parameters, press the
[OK]
to change them.
DATE AND TIME SETTING, WINTER/SUMMER TIME SWITCHING
• To set the date and time, cfr. "Setting the time" section on page 28.
• To set a summer/winter time switch, press or when in the date and time
setting page.
• You will thus enter the automatic winter/summer time-change enable/disable menu.
This reads the current time status (winter or summer) and the operation status (ON for
automatic switching from daylight-saving time to solar time; OFF when this is disabled).
