Page 14
Service Card(s): When activated, they are only authorized to unlock.
(See Assign/Delete Service card(s), page 5) When the lock is opened with
these cards, according to Prog.8, the user password/card can be reset
and the lock can be blocked according to Prog.9 as well.
Factory default is that service card(s) feature is not active. Press 5 - 0
Locking with password / card:
(1)
Press 6 - 0
Locking operation require a password / card to lock.
Automatic Locking (without password/card):
(1)
Press 6 - 1
Locking operation does not require a password / card to lock.
Warning of open lock :
(1)
Press 7 - 1
After lock is open for one minute, lock gives an audible warning to user
with 8 beeps every seconds to notify user that the lock has been left open.
Factory default is that this feature is not active. Press 7 - 0
Resetting User Password with Service Card usage:
(1)
,
(2)
Press 8 - 1
When the lock is unlocked with the service Card, the User Password is
reset. The User Password is restored to default, which is “1010”.
Factory default is that this feature is not active. Press 8 - 0
Blocking the lock :
(2)
Press 9 - 1
If lock opened with Service Card, it can be blocked from further User Card
access. This would insure Service Card is only used to access locks in
emergency. Master Card access would then be required to set up User
Card again.
Factory default is that this feature is not active. Press 9 - 0
(1)
: Valid for Personal operation with card or cardless Personal Operation
options.
(2)
: Valid if any Service Card is active.
