2
Step 2 : Initiate pairing process on your Bluetooth mobile phone/Audio
Device/PC/PDA to pair with the Headset. After search, you can find the
device name “VS-1000”
Step 3 : When asked the Passkey by the mobile phone, enter 1234 and confirm it.
(Note: The 1234 is a Default pin-code pre-stored in the Headset.)
When pairing is successful, the red indicator will turn off and the blue indicator will
flash.
Note:
(1) If the Headset is not in pairing mode, your Bluetooth Device won't find the Headset.
Please set the Headset into pairing mode
before letting your Bluetooth Device
search for the Headset.
(2) If pairing can not finish in a period of time (approx. 2 minutes), the Headset will
return to standby mode. You may need to repeat steps 1 to 3 until pairing succeeds.
4. Listening to Music
If the Bluetooth Device supported Bluetooth stereo audio (A2DP profile), you can listen
music by the headset. And adjust the Headset volume by press the Volume Up and
Volume Down button.
If the Bluetooth Device supported AVRCP profile also, you can control music playback by
headset button PLAY/PAUSE/FWD/REV/STOP.
