B
B
l
l
u
u
e
e
t
t
o
o
o
o
t
t
h
h
S
S
t
t
e
e
r
r
e
e
o
o
H
H
e
e
a
a
d
d
s
s
e
e
t
t
V
V
S
S
-
-
2
2
0
0
0
0
0
0
20F-1, No.77, Sec.1 , Hsin Tai Wu Rd., Hsi-Chih, Taipei Taiwan R.O.C.
Tel. No.:+886-2-2698-3608 Fax No.:+886-2-2698-3648
Aug.05”2008 V1.2
3/4
3. Pairing the Headset
You are required to pair the Headset with your Bluetooth mobile phone/audio
device/PC/PDA before using the Headset.
Step 1 : Turn ON the headset. Hold and keep pressing the Pairing button (S2) for 3
seconds until the
blue
and the
red
indicators are flashing alternatively. The
headset is now ready for pairing.
Step 2 : Initiate pairing process on your Bluetooth mobile phone/Audio Device/PC/PDA
to pair with the Headset. After search, you can find the device name “VS-2000”
Step 3 : When asked the Passkey by the mobile phone, enter 1234 and confirm it. (
Note:
The 1234 is a
Default pin-code pre-stored in the Headset
.)
When pairing is successful, the red indicator will turn off and the blue indicator will
flash..
If pairing can not finish in a period of time (approx. 2 minutes), the Headset will return
to standby mode. You may need to repeat steps 1 to 3 until pairing succeeds.
4. Listening to Music
If the Bluetooth Device supported Bluetooth stereo audio (A2DP profile), you can listen
music by the headset. And adjust the Headset volume by press the Volume Up (S3)and
Volume Down (S6)button.
If the Bluetooth Device supported AVRCP profile also, you can control music playback
by headset button PLAY (S2) / PAUSE (S2) / FWD (S4) / REV (S5)
5. SRS
Press and hold SRS button (S7) for 3 seconds to enable the SRS feature, and press and
hold SRS button (S7) for 3 seconds to disable the SRS feature if SRS is enabled.
Press SRS button (S7) to select SRS mode when SRS is enabled. There are 4 SRS WOW
HD mode in VS-2000.
6. Making Calls
Using the phone keys to make call
Dial the number on the mobile phone as you normally do. Once the call has been set up,
the sound will be transmitted to your Headset automatically.
7. Answering Calls and Ending Call
When the Headset is powered on, and there is an incoming call, you will hear a ring tone.
(1) When the Headset rings, press the Answer button (S2) to answer.
(2) Adjust the Headset volume by press the Volume Up (S3) and Volume Down (S6)
button.
(3) End calls by pressing End button (S2) or don’t press any button.
