①
Installation of the Blind…
First, insert the clutch end into the tongue of clutch
bracket.
②
Second, press the end plug and insert the end plug
end into the hole of bracket of the other side.
③
①
②
③
2
Blind Installation and Removal
Installation
continued…
Blind Installation Tips…
After blind is installed into blind brackets, use a level to check if
the fabrics roll is horizontal; if not, please adjust the position of
blind brackets to keep the fabrics roll level.
3
Install Safety Tension Device
Use two 19mm round head screws to install the safety device.
The chain should be fully extended upon installation of the device.
The blind needs to be level.
The gap on end plug end needs
to be about 4.5mm.
4.5mm
How to install your
#65101-40156
Cordloop
(Roller Blinds with No top treatment)
Difficulty:
2
①
②
The lock pin in the blind bracket
must be slide downward into the
end plug to prevent the blind
from falling.
Align clutch end
of the blind with
the tongue of the
clutch bracket.
①
②
③
Removal of the Blind…
Use a tool to push the lock pin on end plug bracket upward.
Use tool to draw back the end plug from bracket.
Finally remove blind from mounting bracket.
To avoid creating a possible
strangulation hazard for children,
the corded or chained internal
window covering must be installed
in such a way that a loose cord or
chain cannot form a loop 220 mm
or longer at a height of less than
1600 mm above floor level.
A cord/chain guide may be
installed lower than 1600mm
above floor level if the
cord/chain is sufficiently
secured or tensioned to
prevent a loop 220 mm or
longer from being formed.
If a cord/chain guide is
installed lower than 1600 mm
above floor level, it must be
designed to prevent a child
from being able to remove the
cord/chain.
If a cleat is used to secure the
cord, it must be at least 1600 mm
above floor level because a
child is capable of unwinding a
cord from a cleat.
www.venetablinds.com.au/child-safety
WARNING
ALL WINDOW COVERINGS
WITH CORD OR CHAIN
Finally slide the lock pin in the blind bracket downward into the end plug to prevent the
blind from falling.
