Removing the inner door glass for cleaning
o
Do not use any abrasive cleaner that could cause damage.
o
Remember that if the surface of the glass panel becomes scratched,
this could lead to a dangerous failure.
o
To facilitate cleaning, the
inner door glass can be lifted out.
Grip the top and the bottom of the inner door glass panel.
Gently pull the bottom of the inner door glass panel upwards.
Do not raise the panel more than 35° as it can damage the
securing clips.
The securing clips at the bottom of the glass panel will pop out and
the glass panel will be free to remove.
NOTE: If the top securing clips do not also pop out when pulling
the bottom of the glass panel upwards, then pull the top of the
glass panel upwards until the top also pops out.
After cleaning, insert the glass panel correctly back into the door in
the reverse order. Ensure the securing clips slot back into place and
the glass panel locks into place securely.
IMPORTANT: Remember where the panel of glass is removed
from so you can reassemble the door correctly. Do not mix the
glasses up or rearrange the order.
23