E. How to replace Consumable Counter Chip (C-H Chip)
(The machine will notify the Operator to replace
the C-H Chip by displaying the “RC” message.
All other consumables must be replaced at this
time!)
Turn OFF power to the unit
1.
Open the Back Cover by pulling down on
2.
the Back Panel Door, to expose both the
Buffing Solution and Water Bottles.
Locate the C-H Chip positioned between
3.
these two bottles.
Grab the C-H Chip with your Index Finger and Thumb, by pulling out towards
4.
yourself, and completely remove the depleted C-H Chip. Note: For easier access,
remove either the Buffing Solution Bottle or the Water Bottle.
Install a new C-H Chip.
5.
In order for the reset to take place, you must turn ON power to the unit.
6.
Once a new C-H Chip has been installed, the “RC” error message on the Main
7.
Screen will disappear and the “Supplies – Fuel Gauge” will display 100%. The
User can now resume operation.
Replacing Consumables
SECTION 7
18
