Basic Engine Specifications:
Displacement - 25.4cc
Bore x Stroke - 34mm x 28mm
Max HP - 4.5@12,500 RPM
Idle RPM - 3500 +/- 150
Fuel Type - 87 Octane with Premix 2 Stroke Oil
Ignition - Ikeda TDi
Carburetion - Walbro WT771 with Primer Pump
Net Weight - 2.05kg (w/ Mount)
Manual Pull Start
Premix Fuel Specifications:
Use 90+ Octane Unleaded Gasoline
Do not use gasoline with any alcohol or ethanol added
Use a high performance 2 Stroke Premix Engine Oil
Mix Ratio - 20-25 parts Oil to 1 part Gas (20-25:1) for break-in period, 30:1 standard mixture
-The carburetor is tuned from the factory to run but may require an adjustment due to the climate and
elevation in your area.
-There are three adjustments on the carburetor. The low speed needle, high speed needle and idle
screw.
Specifications
Specifications
Engine Operations
Engine Operations
High
Speed Needle
Low
Speed Needle
Idle Screw
- 2 -
Summary of Contents for VEN-1827
Page 10: ...Notes Notes...
