2. Press “X” to save
To set up chat on your headset
1. On the main PS3 menu go to “Settings” and
select > “Accessory Settings” > “Audio Devices” >
“Input Device” and select “USB Ear Microphone”.
Then select “Output Device” and “USB Ear
Microphone”.
2. Then select “Microphone Level” and adjust as
required, ensuring the volume indicator just
reaches red when you speak loudly into the
headset microphone.
3. Press “OK” to save.
Setting up your Xbox 360
®
with HDMI
Fig.4
1. Insert the USB directly into your Xbox 360.
2. Connect the Xbox Audio Adaptor (sold separately,
or supplied with your Xbox) directly into your Xbox
360, then connect both the red and white headset
audio connectors into the corresponding audio
inputs on the Xbox Audio Adaptor cable.
3. Finally connect the 2.5mm jack directly into your
Xbox 360 controller for chat.
*When connecting with HDMI you will require an Xbox 360 Audio
Adaptor Cable for audio output (sold separately).
Setting up your Xbox 360 with AV
Fig.5
1. Insert the USB directly into your Xbox 360.
2. Connect both the red and white headset audio
connectors into the corresponding audio inputs on
your TV.
3. Then using the AV cable supplied with your
console, connect the Xbox 360 red and white
audio connectors into the back of the headset
audio connectors and the yellow video connector
into the corresponding input on your TV.
4. Finally connect the 2.5mm jack directly into your
Xbox 360 controller for chat.
To set up chat on your headset
1. On the main Xbox 360 menu go to “Settings” >
“Preferences” > “Voice”.
2. Then select “Voice Volume” and set volume at 10.
3. Then select “Game Volume” and also set volume
at 10.
4. Finally select “Voice Output” and set as “Play
Through Headset”.
5. Ensure that the mute is turned off on the Inline
Volume Control Unit and that the volume is turned
up on the headset.
Please note: you may still experience sound from
your TV. If you do not wish to hear the volume from
your TV whilst using your gaming headset, either
mute or turn down your TV volume.
Setting up your PC
1. Simply connect the USB to your PC.
2. Please note: when connected, the Game Volume
on the Inline Volume Control Unit is disabled; only
the Vibration, Chat and Mute On/Off are functional.
Setting up your Mac
®
1. Simply connect the USB to your Mac.
2. Go to “System Preferences” > “Sound”.
3. On the “Output” tab select “USB Ear-
Microphone”.
4. On the” Input” tab make sure the same “USB Ear-
Microphone” is also selected.
5. To control volume adjust the Chat dial.
6. Please note: when connected, the Game Volume
on the Inline Volume Control Unit is disabled; only
the Vibration, Chat and Mute On/Off are functional.
Care and Maintenance
Your device is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you to protect your
warranty coverage:
· Keep your device out of the reach of small
children.
· Keep the device dry. Precipitation, humidity and
all types of liquid or moisture can contain minerals
that will corrode electronic circuits. If your device
does get wet, allow it to dry completely.
· Do not use or store the device in dusty, dirty areas,
as moving parts and electronic components of
your device can be damaged.
· Do not use or store the device in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
· Do not use or store the device in cold areas. When
the device returns to its normal temperature,
moisture can form inside the device and damage
electronic circuit boards.
· Do not drop, knock or shake the device. Rough
handling can break internal circuit boards and fine
mechanics.
· Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the device. All of the
previous suggestions apply equally to your device,
battery, charger or any enhancements.
Note: parts of the headset are magnetic. Metallic
materials may be attracted to the headset. Do not
place credit cards or other magnetic storage media
near the headset, as information stored on them may
be erased. Occasionally the headset may pick up
interference from mobile phones.
Français
Casque Vibrant XT+
Compatible avec PS4
™
, PS3
™
, Xbox 360
®
, PC
& Mac
®
Mode d’emploi
Merci d’avoir acheter ce casque Vibrant XT+.
Veuillez lire attentivement ce manuel d’instructions
avant d’utiliser ce produit et conservez-le en lieu
sûr à des fins de référence future. Ce guide inclut
les configurations les plus usuelles pour l’utilisation
du casque vibrant XT+ avec votre PS4, PS3 ou
votre Xbox 360 via HDMI ou AV. Pour toutes autres
configurations sur votre télévision, votre écran ou
votre écran de jeu, veuillez consulter les instructions
de leur fabricant. Veuillez également noter que
vous pourriez avoir besoin d’utiliser des câbles
supplémentaires (vendus séparément) en fonction de
la configuration de votre système.
Pour plus de renseignements, veuillez contacter
notre service d’assistance. Merci et bonne écoute !
Contenu
1 x Casque Vibrant XT+
1 x Mode d’emploi
Configuration de votre PS4™ avec HDMI
Fig.1
1. Insérez la fiche USB directement dans votre PS4.
2. Raccordez ensuite les connecteurs audio rouge
et blanc du casque aux connecteurs audio rouge
et blanc du RCA / répartiteur 3,5 mm. Branchez le
port de votre casque sur votre télévision.
3. Dans le menu PS4, le casque est
automatiquement identifié. Si vous n’avez pas
ouvert de session, vous devrez sélectionner un
utilisateur.
4. Dans le menu principal, sous Settings,
sélectionnez Sound and Screen > Audio Output
Settings > Output To Headphones et sélectionnez
Chat Audio. Appuyez sur X pour confirmer.
5. Maintenez le bouton PS de votre télécommande
enfoncé pour sélectionner Adjust Devices.
Tournez le Volume Control (Headphones) au
maximum.
VS2849_Multi_Vibration Headset XT+_Instructions_A5_FULL.indd 7-8
15/07/2014 15:40
